Electrical safety tools and equipment filetype pdf Benalla

electrical safety tools and equipment filetype pdf

Equipment safety rules worksafe.qld.gov.au Cooking Equipment Safety Do: Always make sure equipment is off before plugging it in and starting it. Always make sure all the safety guards are in place in all choppers, mixers and food processors. Check for frayed cords and loose parts before using any equipment. Plug cooking appliances directly into an out- let. If equipment is broken, label “do not use” and notify a su-pervisor

www.catuelec

Equipment safety rules worksafe.qld.gov.au. The equipment safety rules cover the pre-market component of the electrical equipment safety system (EESS) and apply to the sale of new electrical equipment including sales via the internet. The rules do not cover the sale of second hand goods., specific topics of arc welding safety, as well as the manufacturers’ instructions and material safety data sheets (MSDS’s). PERSONAL PROTECTIVE EQUIPMENT Protective Clothing Welders, like firemen, must wear clothing to protect them from being burned. Of all injuries to welders, burns are the most common due to sparks landing on bare skin. Welding arcs are very intense and can cause burns.

Safety: In actuality, grounding=s purpose is a lot more than providing a common point of reference. It is the key to SAFETY. That is, the protection of Personnel Equipment Facilities When considering protection of personnel, equipment and facilities against electrical hazards there is a NEED TO CONSIDER both Grounding and Overcurrent Protection and how they relate. They go hand in hand. A At the present time, CATU Safety Equipment, including all the range of short-circuiting and earthing systems, the DETEX TM voltage detectors and testers, the live working tools and the individual equipment for linesmen, is used by the Main Power Utilities, Electrical Contractors,

3760:2010 In-service safety inspection and testing of electrical equipment. In addition to legislative requirements the general principles of (identification, risk management assessment, control, and review) should be applied to electrical hazards. 3760:2010 In-service safety inspection and testing of electrical equipment. In addition to legislative requirements the general principles of (identification, risk management assessment, control, and review) should be applied to electrical hazards.

specific topics of arc welding safety, as well as the manufacturers’ instructions and material safety data sheets (MSDS’s). PERSONAL PROTECTIVE EQUIPMENT Protective Clothing Welders, like firemen, must wear clothing to protect them from being burned. Of all injuries to welders, burns are the most common due to sparks landing on bare skin. Welding arcs are very intense and can cause burns Power Tools Because power tools are so common in construction, workers are constantly exposed to a variety of hazards. The very tool that makes their job easy and efficient may one day be the cause of a tragic accident.

Power Tools Because power tools are so common in construction, workers are constantly exposed to a variety of hazards. The very tool that makes their job easy and efficient may one day be the cause of a tragic accident. Publication Data This document was developed by the Electrical Safety program and published by ESH Publishing. Document Title: Electrical Equipment Inspection Program

Safety in electrical testing at work Page 3 of 14 Some questions to ask when carrying out the risk assessment are: Can the work be done with the equipment dead or energised at a safe voltage When performing electrical work, ensure the use of insulated, rated tools. When using pneumatic tools, a safety clip or retainer must be installed to prevent the equipment or hoses from coming apart.

starting switch from the bracket and use it and the feeding tool as shown in Figure 1 on the Tool Application Page. 8 As soon as the cleaning tool has negotiated the trap, shut off the motor and return the switch to the bracket. SafetyWor kAlerting with energised electrical lines The purpose of this Safety Alert is to highlight the danger of electric shocks and electrocution when working with energised electrical lines. Background An electrician was recently killed in Darwin’s rural area repairing damage to electrical infrastructure after a storm. The electrician was working with an energised electrical line when he

5.4.6 Record of certified equipment 5.5 Electrical safety audits 5.5.1 First external electrical safety audit on this Procedure 5.5.2 Regular electrical safety self-audits 5.6 Isolation techniques and resuscitation training 6 DOCUMENT HISTORY 7 APPENDIX A 7.1 Categories of Competent Persons 7.2 Guidelines for assessment of competent persons 8 APPENDIX B 8.1 Certification and … 5.4.6 Record of certified equipment 5.5 Electrical safety audits 5.5.1 First external electrical safety audit on this Procedure 5.5.2 Regular electrical safety self-audits 5.6 Isolation techniques and resuscitation training 6 DOCUMENT HISTORY 7 APPENDIX A 7.1 Categories of Competent Persons 7.2 Guidelines for assessment of competent persons 8 APPENDIX B 8.1 Certification and …

3760:2010 In-service safety inspection and testing of electrical equipment. In addition to legislative requirements the general principles of (identification, risk management assessment, control, and review) should be applied to electrical hazards. SafetyWor kAlerting with energised electrical lines The purpose of this Safety Alert is to highlight the danger of electric shocks and electrocution when working with energised electrical lines. Background An electrician was recently killed in Darwin’s rural area repairing damage to electrical infrastructure after a storm. The electrician was working with an energised electrical line when he

ESA615 Electrical Safety Analyzer The ESA615 Electrical Safety Analyzer brings fast and simple automated testing to a portable analyzer for healthcare technology management professionals that perform electrical safety test-ing on medical equipment both in the field and in facilities. Whether it is simple testing or compre-hensive analysis, the ESA615 can do it all. This multifaceted device Safety: In actuality, grounding=s purpose is a lot more than providing a common point of reference. It is the key to SAFETY. That is, the protection of Personnel Equipment Facilities When considering protection of personnel, equipment and facilities against electrical hazards there is a NEED TO CONSIDER both Grounding and Overcurrent Protection and how they relate. They go hand in hand. A

NAVFAC WORKING WITH ELECTRICITY Special training is required for work on electrical equipment. ALL ELECTRICAL WORK SHALL COMPLY WITH APPLICABLE NATIONAL ELECTRICAL SAFETY sensitive electrical equipment, especially computers, TVs, Safety tip Circuit breakers and safety switches should only be reset after first checking for damaged or unsafe electrical appliances or a reason why the safety switch or circuit breaker was triggered. Figure 1 Typical switchboard with the main switch, safety switch with test button, and four circuit breakers. Is my electrician

Safety in electrical testing at work Page 3 of 14 Some questions to ask when carrying out the risk assessment are: Can the work be done with the equipment dead or energised at a safe voltage Safety: In actuality, grounding=s purpose is a lot more than providing a common point of reference. It is the key to SAFETY. That is, the protection of Personnel Equipment Facilities When considering protection of personnel, equipment and facilities against electrical hazards there is a NEED TO CONSIDER both Grounding and Overcurrent Protection and how they relate. They go hand in hand. A

ESA615 Electrical Safety Analyzer Fluke Corporation. At the present time, CATU Safety Equipment, including all the range of short-circuiting and earthing systems, the DETEX TM voltage detectors and testers, the live working tools and the individual equipment for linesmen, is used by the Main Power Utilities, Electrical Contractors,, Safety, within the shop and beyond, is an ongoing concern for every vocational instructor. Teaching young people to respect power tools and take hazards and safety procedures to.

Toolbox Talk iSafety OSSA & HSE Safety Training Courses

electrical safety tools and equipment filetype pdf

Safety & Risk Office 5-Minute Safety Talk No. 5 Electrical. Cooking Equipment Safety Do: Always make sure equipment is off before plugging it in and starting it. Always make sure all the safety guards are in place in all choppers, mixers and food processors. Check for frayed cords and loose parts before using any equipment. Plug cooking appliances directly into an out- let. If equipment is broken, label “do not use” and notify a su-pervisor, Corporate Environmental Health & Safety (EHS) Standard Electrical Safety Intel Corporation 2 Rev 1 -7/1/2011 I. Introduction A. Purpose: i. The purpose of this standard is to define the minimum requirements to provide a practical safe working area for employees relative to the hazards arising from the use of electricity. ii. Each site and/or group shall implement a program which meets the.

electrical safety tools and equipment filetype pdf

ESA615 Electrical Safety Analyzer Fluke Corporation. Power Tools Because power tools are so common in construction, workers are constantly exposed to a variety of hazards. The very tool that makes their job easy and efficient may one day be the cause of a tragic accident., CATU Electrical Safety Equipment protects Senior Authorised Persons (SAP's), Linesmen, Cable Jointers and High Voltage Electrical Engineers during switching and maintenance operations on low and high voltage cable systems, including 3.3kV, 6.6kV, 11kV, 33kV and EHV..

ESA615 Electrical Safety Analyzer Fluke Corporation

electrical safety tools and equipment filetype pdf

lines SafetyWor kAlerting with energised electrical. Electrical Checklist Cutting Tools Safety Checklist..... 43 Preventing Falls Checklist This Safety Management Toolkit is aimed at employers and owners in small business — now known as Person Conducting a Business or Undertaking (PCBU), which is explained more in this Toolkit. It will also be useful for managers. By following the steps in this Toolkit and applying them to your Electrical equipment such as switchboards, panelboards, industrial control panels, meter socket enclosures, and motor control centers that are in other than dwelling units and that are likely to require.

electrical safety tools and equipment filetype pdf

  • Equipment safety rules worksafe.qld.gov.au
  • Safety Talk Power Tools
  • Safety & Risk Office 5-Minute Safety Talk No. 5 Electrical

  • Electrical equipment such as switchboards, panelboards, industrial control panels, meter socket enclosures, and motor control centers that are in other than dwelling units and that are likely to require Safety, within the shop and beyond, is an ongoing concern for every vocational instructor. Teaching young people to respect power tools and take hazards and safety procedures to

    6 MATERIALS, TOOLS AND EQUIPMENT 7 6.1 General 7 6.2 Tools and Equipment at Worksites 8 6.3 Calibrated Tools, Instruments and Equipment 8 7 WASTE MANAGEMENT 8 8 SAFETY 8 8.1 Safety Management Systems 8 8.2 High Risk Construction Activities 9 8.3 Hazard Identification and Management 9 8.4 Worksite Conditions and Monitoring 9 8.5 Safety Incident at Worksite 9 8.6 Personal Protective Equipment … Corporate Environmental Health & Safety (EHS) Standard Electrical Safety Intel Corporation 2 Rev 1 -7/1/2011 I. Introduction A. Purpose: i. The purpose of this standard is to define the minimum requirements to provide a practical safe working area for employees relative to the hazards arising from the use of electricity. ii. Each site and/or group shall implement a program which meets the

    performance on or near low-voltage electrical installations and equipment. It provides a It provides a minimum set of procedures, safety requirements and recommendations to manage the Safety in electrical testing at work Page 3 of 14 Some questions to ask when carrying out the risk assessment are: Can the work be done with the equipment dead or energised at a safe voltage

    CATU Electrical Safety Equipment protects Senior Authorised Persons (SAP's), Linesmen, Cable Jointers and High Voltage Electrical Engineers during switching and maintenance operations on low and high voltage cable systems, including 3.3kV, 6.6kV, 11kV, 33kV and EHV. 6 MATERIALS, TOOLS AND EQUIPMENT 7 6.1 General 7 6.2 Tools and Equipment at Worksites 8 6.3 Calibrated Tools, Instruments and Equipment 8 7 WASTE MANAGEMENT 8 8 SAFETY 8 8.1 Safety Management Systems 8 8.2 High Risk Construction Activities 9 8.3 Hazard Identification and Management 9 8.4 Worksite Conditions and Monitoring 9 8.5 Safety Incident at Worksite 9 8.6 Personal Protective Equipment …

    3760:2010 In-service safety inspection and testing of electrical equipment. In addition to legislative requirements the general principles of (identification, risk management assessment, control, and review) should be applied to electrical hazards. sensitive electrical equipment, especially computers, TVs, Safety tip Circuit breakers and safety switches should only be reset after first checking for damaged or unsafe electrical appliances or a reason why the safety switch or circuit breaker was triggered. Figure 1 Typical switchboard with the main switch, safety switch with test button, and four circuit breakers. Is my electrician

    Corporate Environmental Health & Safety (EHS) Standard Electrical Safety Intel Corporation 2 Rev 1 -7/1/2011 I. Introduction A. Purpose: i. The purpose of this standard is to define the minimum requirements to provide a practical safe working area for employees relative to the hazards arising from the use of electricity. ii. Each site and/or group shall implement a program which meets the The equipment safety rules cover the pre-market component of the electrical equipment safety system (EESS) and apply to the sale of new electrical equipment including sales via the internet. The rules do not cover the sale of second hand goods.

    SafetyWor kAlerting with energised electrical lines The purpose of this Safety Alert is to highlight the danger of electric shocks and electrocution when working with energised electrical lines. Background An electrician was recently killed in Darwin’s rural area repairing damage to electrical infrastructure after a storm. The electrician was working with an energised electrical line when he Page 2 of 3 Always inspect extension cords and the cords of power tools and equipment for damage (cuts), fraying and defective plugs before using them.

    Safety: In actuality, grounding=s purpose is a lot more than providing a common point of reference. It is the key to SAFETY. That is, the protection of Personnel Equipment Facilities When considering protection of personnel, equipment and facilities against electrical hazards there is a NEED TO CONSIDER both Grounding and Overcurrent Protection and how they relate. They go hand in hand. A Electrical Checklist Cutting Tools Safety Checklist..... 43 Preventing Falls Checklist This Safety Management Toolkit is aimed at employers and owners in small business — now known as Person Conducting a Business or Undertaking (PCBU), which is explained more in this Toolkit. It will also be useful for managers. By following the steps in this Toolkit and applying them to your

    starting switch from the bracket and use it and the feeding tool as shown in Figure 1 on the Tool Application Page. 8 As soon as the cleaning tool has negotiated the trap, shut off the motor and return the switch to the bracket. Cooking Equipment Safety Do: Always make sure equipment is off before plugging it in and starting it. Always make sure all the safety guards are in place in all choppers, mixers and food processors. Check for frayed cords and loose parts before using any equipment. Plug cooking appliances directly into an out- let. If equipment is broken, label “do not use” and notify a su-pervisor

    Electrical Checklist Cutting Tools Safety Checklist..... 43 Preventing Falls Checklist This Safety Management Toolkit is aimed at employers and owners in small business — now known as Person Conducting a Business or Undertaking (PCBU), which is explained more in this Toolkit. It will also be useful for managers. By following the steps in this Toolkit and applying them to your Power Tools Because power tools are so common in construction, workers are constantly exposed to a variety of hazards. The very tool that makes their job easy and efficient may one day be the cause of a tragic accident.

    Safety: In actuality, grounding=s purpose is a lot more than providing a common point of reference. It is the key to SAFETY. That is, the protection of Personnel Equipment Facilities When considering protection of personnel, equipment and facilities against electrical hazards there is a NEED TO CONSIDER both Grounding and Overcurrent Protection and how they relate. They go hand in hand. A ESA615 Electrical Safety Analyzer The ESA615 Electrical Safety Analyzer brings fast and simple automated testing to a portable analyzer for healthcare technology management professionals that perform electrical safety test-ing on medical equipment both in the field and in facilities. Whether it is simple testing or compre-hensive analysis, the ESA615 can do it all. This multifaceted device

    Electrical Equipment Inspection Program Stanford University

    electrical safety tools and equipment filetype pdf

    Equipment safety rules worksafe.qld.gov.au. Page 2 of 3 Always inspect extension cords and the cords of power tools and equipment for damage (cuts), fraying and defective plugs before using them., Safety in electrical testing at work Page 3 of 14 Some questions to ask when carrying out the risk assessment are: Can the work be done with the equipment dead or energised at a safe voltage.

    Electrical Equipment Inspection Program Stanford University

    lines SafetyWor kAlerting with energised electrical. starting switch from the bracket and use it and the feeding tool as shown in Figure 1 on the Tool Application Page. 8 As soon as the cleaning tool has negotiated the trap, shut off the motor and return the switch to the bracket., The equipment safety rules cover the pre-market component of the electrical equipment safety system (EESS) and apply to the sale of new electrical equipment including sales via the internet. The rules do not cover the sale of second hand goods..

    specific topics of arc welding safety, as well as the manufacturers’ instructions and material safety data sheets (MSDS’s). PERSONAL PROTECTIVE EQUIPMENT Protective Clothing Welders, like firemen, must wear clothing to protect them from being burned. Of all injuries to welders, burns are the most common due to sparks landing on bare skin. Welding arcs are very intense and can cause burns sensitive electrical equipment, especially computers, TVs, Safety tip Circuit breakers and safety switches should only be reset after first checking for damaged or unsafe electrical appliances or a reason why the safety switch or circuit breaker was triggered. Figure 1 Typical switchboard with the main switch, safety switch with test button, and four circuit breakers. Is my electrician

    specific topics of arc welding safety, as well as the manufacturers’ instructions and material safety data sheets (MSDS’s). PERSONAL PROTECTIVE EQUIPMENT Protective Clothing Welders, like firemen, must wear clothing to protect them from being burned. Of all injuries to welders, burns are the most common due to sparks landing on bare skin. Welding arcs are very intense and can cause burns 6 MATERIALS, TOOLS AND EQUIPMENT 7 6.1 General 7 6.2 Tools and Equipment at Worksites 8 6.3 Calibrated Tools, Instruments and Equipment 8 7 WASTE MANAGEMENT 8 8 SAFETY 8 8.1 Safety Management Systems 8 8.2 High Risk Construction Activities 9 8.3 Hazard Identification and Management 9 8.4 Worksite Conditions and Monitoring 9 8.5 Safety Incident at Worksite 9 8.6 Personal Protective Equipment …

    When performing electrical work, ensure the use of insulated, rated tools. When using pneumatic tools, a safety clip or retainer must be installed to prevent the equipment or hoses from coming apart. Safety, within the shop and beyond, is an ongoing concern for every vocational instructor. Teaching young people to respect power tools and take hazards and safety procedures to

    ESA615 Electrical Safety Analyzer The ESA615 Electrical Safety Analyzer brings fast and simple automated testing to a portable analyzer for healthcare technology management professionals that perform electrical safety test-ing on medical equipment both in the field and in facilities. Whether it is simple testing or compre-hensive analysis, the ESA615 can do it all. This multifaceted device ESA615 Electrical Safety Analyzer The ESA615 Electrical Safety Analyzer brings fast and simple automated testing to a portable analyzer for healthcare technology management professionals that perform electrical safety test-ing on medical equipment both in the field and in facilities. Whether it is simple testing or compre-hensive analysis, the ESA615 can do it all. This multifaceted device

    Publication Data This document was developed by the Electrical Safety program and published by ESH Publishing. Document Title: Electrical Equipment Inspection Program Electrical equipment such as switchboards, panelboards, industrial control panels, meter socket enclosures, and motor control centers that are in other than dwelling units and that are likely to require

    sensitive electrical equipment, especially computers, TVs, Safety tip Circuit breakers and safety switches should only be reset after first checking for damaged or unsafe electrical appliances or a reason why the safety switch or circuit breaker was triggered. Figure 1 Typical switchboard with the main switch, safety switch with test button, and four circuit breakers. Is my electrician CATU Electrical Safety Equipment protects Senior Authorised Persons (SAP's), Linesmen, Cable Jointers and High Voltage Electrical Engineers during switching and maintenance operations on low and high voltage cable systems, including 3.3kV, 6.6kV, 11kV, 33kV and EHV.

    The equipment safety rules cover the pre-market component of the electrical equipment safety system (EESS) and apply to the sale of new electrical equipment including sales via the internet. The rules do not cover the sale of second hand goods. Publication Data This document was developed by the Electrical Safety program and published by ESH Publishing. Document Title: Electrical Equipment Inspection Program

    Cooking Equipment Safety Do: Always make sure equipment is off before plugging it in and starting it. Always make sure all the safety guards are in place in all choppers, mixers and food processors. Check for frayed cords and loose parts before using any equipment. Plug cooking appliances directly into an out- let. If equipment is broken, label “do not use” and notify a su-pervisor Electrical equipment such as switchboards, panelboards, industrial control panels, meter socket enclosures, and motor control centers that are in other than dwelling units and that are likely to require

    Page 2 of 3 Always inspect extension cords and the cords of power tools and equipment for damage (cuts), fraying and defective plugs before using them. Toolbox Talk Electrical Safety at Construction Sites It doesn't take a lot of electricity to kill you. The amount of current needed to light an ordinary 60-watt light bulb is five times what can kill a person. Thus, all electrical equipment on construction sites is potentially deadly. Electrical extension cords are numerous on construction sites and become damaged because of the rough

    Page 2 of 3 Always inspect extension cords and the cords of power tools and equipment for damage (cuts), fraying and defective plugs before using them. When performing electrical work, ensure the use of insulated, rated tools. When using pneumatic tools, a safety clip or retainer must be installed to prevent the equipment or hoses from coming apart.

    Safety & Risk Office 5-Minute Safety Talk No. 5 Electrical

    electrical safety tools and equipment filetype pdf

    Safety Talk Power Tools. Toolbox Talk Electrical Safety at Construction Sites It doesn't take a lot of electricity to kill you. The amount of current needed to light an ordinary 60-watt light bulb is five times what can kill a person. Thus, all electrical equipment on construction sites is potentially deadly. Electrical extension cords are numerous on construction sites and become damaged because of the rough, When performing electrical work, ensure the use of insulated, rated tools. When using pneumatic tools, a safety clip or retainer must be installed to prevent the equipment or hoses from coming apart..

    Equipment safety rules worksafe.qld.gov.au

    electrical safety tools and equipment filetype pdf

    Equipment safety rules worksafe.qld.gov.au. Power Tools Because power tools are so common in construction, workers are constantly exposed to a variety of hazards. The very tool that makes their job easy and efficient may one day be the cause of a tragic accident. Toolbox Talk Electrical Safety at Construction Sites It doesn't take a lot of electricity to kill you. The amount of current needed to light an ordinary 60-watt light bulb is five times what can kill a person. Thus, all electrical equipment on construction sites is potentially deadly. Electrical extension cords are numerous on construction sites and become damaged because of the rough.

    electrical safety tools and equipment filetype pdf


    Electrical Checklist Cutting Tools Safety Checklist..... 43 Preventing Falls Checklist This Safety Management Toolkit is aimed at employers and owners in small business — now known as Person Conducting a Business or Undertaking (PCBU), which is explained more in this Toolkit. It will also be useful for managers. By following the steps in this Toolkit and applying them to your Power Tools Because power tools are so common in construction, workers are constantly exposed to a variety of hazards. The very tool that makes their job easy and efficient may one day be the cause of a tragic accident.

    specific topics of arc welding safety, as well as the manufacturers’ instructions and material safety data sheets (MSDS’s). PERSONAL PROTECTIVE EQUIPMENT Protective Clothing Welders, like firemen, must wear clothing to protect them from being burned. Of all injuries to welders, burns are the most common due to sparks landing on bare skin. Welding arcs are very intense and can cause burns 3760:2010 In-service safety inspection and testing of electrical equipment. In addition to legislative requirements the general principles of (identification, risk management assessment, control, and review) should be applied to electrical hazards.

    At the present time, CATU Safety Equipment, including all the range of short-circuiting and earthing systems, the DETEX TM voltage detectors and testers, the live working tools and the individual equipment for linesmen, is used by the Main Power Utilities, Electrical Contractors, Publication Data This document was developed by the Electrical Safety program and published by ESH Publishing. Document Title: Electrical Equipment Inspection Program

    Electrical equipment such as switchboards, panelboards, industrial control panels, meter socket enclosures, and motor control centers that are in other than dwelling units and that are likely to require Publication Data This document was developed by the Electrical Safety program and published by ESH Publishing. Document Title: Electrical Equipment Inspection Program

    Power Tools Because power tools are so common in construction, workers are constantly exposed to a variety of hazards. The very tool that makes their job easy and efficient may one day be the cause of a tragic accident. Safety in electrical testing at work Page 3 of 14 Some questions to ask when carrying out the risk assessment are: Can the work be done with the equipment dead or energised at a safe voltage

    5.4.6 Record of certified equipment 5.5 Electrical safety audits 5.5.1 First external electrical safety audit on this Procedure 5.5.2 Regular electrical safety self-audits 5.6 Isolation techniques and resuscitation training 6 DOCUMENT HISTORY 7 APPENDIX A 7.1 Categories of Competent Persons 7.2 Guidelines for assessment of competent persons 8 APPENDIX B 8.1 Certification and … Power Tools Because power tools are so common in construction, workers are constantly exposed to a variety of hazards. The very tool that makes their job easy and efficient may one day be the cause of a tragic accident.

    Publication Data This document was developed by the Electrical Safety program and published by ESH Publishing. Document Title: Electrical Equipment Inspection Program 5 Electrical Safety Procedure undertaking, outworkers, apprentices or trainees, work experience students and volunteers who may come into contact with electricity and electrical equipment.

    sensitive electrical equipment, especially computers, TVs, Safety tip Circuit breakers and safety switches should only be reset after first checking for damaged or unsafe electrical appliances or a reason why the safety switch or circuit breaker was triggered. Figure 1 Typical switchboard with the main switch, safety switch with test button, and four circuit breakers. Is my electrician Corporate Environmental Health & Safety (EHS) Standard Electrical Safety Intel Corporation 2 Rev 1 -7/1/2011 I. Introduction A. Purpose: i. The purpose of this standard is to define the minimum requirements to provide a practical safe working area for employees relative to the hazards arising from the use of electricity. ii. Each site and/or group shall implement a program which meets the

    5 Electrical Safety Procedure undertaking, outworkers, apprentices or trainees, work experience students and volunteers who may come into contact with electricity and electrical equipment. 6 MATERIALS, TOOLS AND EQUIPMENT 7 6.1 General 7 6.2 Tools and Equipment at Worksites 8 6.3 Calibrated Tools, Instruments and Equipment 8 7 WASTE MANAGEMENT 8 8 SAFETY 8 8.1 Safety Management Systems 8 8.2 High Risk Construction Activities 9 8.3 Hazard Identification and Management 9 8.4 Worksite Conditions and Monitoring 9 8.5 Safety Incident at Worksite 9 8.6 Personal Protective Equipment …

    The equipment safety rules cover the pre-market component of the electrical equipment safety system (EESS) and apply to the sale of new electrical equipment including sales via the internet. The rules do not cover the sale of second hand goods. 6 MATERIALS, TOOLS AND EQUIPMENT 7 6.1 General 7 6.2 Tools and Equipment at Worksites 8 6.3 Calibrated Tools, Instruments and Equipment 8 7 WASTE MANAGEMENT 8 8 SAFETY 8 8.1 Safety Management Systems 8 8.2 High Risk Construction Activities 9 8.3 Hazard Identification and Management 9 8.4 Worksite Conditions and Monitoring 9 8.5 Safety Incident at Worksite 9 8.6 Personal Protective Equipment …

    electrical safety tools and equipment filetype pdf

    The equipment safety rules cover the pre-market component of the electrical equipment safety system (EESS) and apply to the sale of new electrical equipment including sales via the internet. The rules do not cover the sale of second hand goods. 3760:2010 In-service safety inspection and testing of electrical equipment. In addition to legislative requirements the general principles of (identification, risk management assessment, control, and review) should be applied to electrical hazards.